This article is intended for qualified aesthetic practitioners. It is technical information, not patient advice.
Redensity 1 is Teoxane's non-cross-linked hyaluronic acid skin booster, sold in the UK as Teosyal PureSense Redensity 1 (you will also see it written as Redensity I, and in some markets as RHA Redensity). It sits between a mesotherapy cocktail and a fine-line filler: it hydrates and improves skin quality across a whole area rather than lifting or volumising a point. Most of the questions practitioners ask about it come down to three things: what is in the syringe, how superficially it should go, and how to space sessions so the patient sees steady improvement without a face full of papules. This article covers all three, plus where Redensity 1 sits against Redensity 2 and other boosters.
What is in a syringe of Redensity 1
The gel is non-cross-linked HA, which is why it spreads easily and is not designed to hold a shape. What separates it from a plain HA booster is what Teoxane calls the dermo-restructuring complex. According to the product information on our Teosyal Redensity I PureSense 3ml listing, this is:
- 8 amino acids: glycine, lysine, threonine, proline, isoleucine, leucine, valine and arginine
- 3 antioxidants: glutathione, N-acetyl-L-cysteine and alpha-lipoic acid
- Vitamin B6 and two minerals, zinc and copper
- Lidocaine, which Teoxane states is present at 0.3% across its PureSense and RHA products (Teoxane product information)
It comes in a 3ml syringe, which covers a full face, or a full face plus neck in thinner skin, in one sitting, and as a pack of two 1ml syringes for smaller areas. The 3ml syringe is the one most clinics stock, because a typical full-face session uses most of it, and splitting a syringe across patients is not acceptable practice.
Because the HA is not cross-linked, Teoxane's own patient-facing information gives the expected duration of Redensity 1 as "at least 3 months" (source). That is the figure to use in consultation and on consent forms. Quoting longer durations sets expectations you may not meet.
Which patients suit Redensity 1
The best candidates have a skin-quality complaint rather than a volume complaint. Think dehydrated, dull or crepey skin, fine static lines across the cheeks, a roughened texture after sun exposure, and early laxity in the neck and décolletage. Common treatment areas are the cheeks, perioral area, neck, décolletage and the backs of the hands.
It is a poor choice on its own for:
- Structural deflation or loss of projection, which needs a cross-linked filler at the correct depth.
- Deep static folds, where a booster will soften the skin over the fold but will not fill it.
- Patients expecting a visible "result" within a week. Redensity 1 works gradually, and it is honest to say so at the consultation stage.
Usual contraindications for HA devices apply: active infection or inflammation at the site, pregnancy and breastfeeding, a history of hypersensitivity to HA or to any component, and caution with anticoagulants and autoimmune disease. Because the formulation contains lidocaine, document any known sensitivity to amide local anaesthetics before treatment.
Injection depth and technique
Stay superficial
Redensity 1 belongs in the superficial dermis or immediate subdermis. Placing it too deep wastes product, and placing it too superficially leaves visible papules and a risk of a bluish Tyndall cast in thin skin. Teoxane's own babyGLOW protocol, presented as an e-poster at IMCAS Paris in January 2026, uses an 8-point injection approach in the immediate subdermis and reports, using ultrasound, placement in that layer with no unwanted migration after the first session (Teoxane, babyGLOW). The rationale given is that the fluid gel spreads evenly from a few well-placed deposits, which reduces the number of papules compared with dense micro-puncture grids.
Micro-bolus versus multi-puncture
Most practitioners use one of two approaches with a fine needle (30G or 32G, 4mm to 13mm):
- Micro-bolus: small aliquots (around 0.01–0.02ml) placed on a grid roughly 1cm apart. This gives good control, works well on cheeks and neck, and the papules settle within hours to a day or two.
- Multi-puncture or linear threading: shorter passes in rows, useful for crepey skin on the décolletage and hands where you want coverage over a broad flat area.
Some practitioners deliver Redensity 1 with a mesotherapy injector gun. If you do, calibrate depth and volume per shot carefully, because the device makes it easy to place product too superficially. A 25G cannula can be used for the neck and décolletage in experienced hands, entering through a single point and fanning in the superficial plane, but a needle gives more precise depth control in thin facial skin. If you are restocking consumables for this, our needles, cannulas and syringes collection covers the common gauges and lengths.
Practical points that cut down papules
- Inject slowly with low pressure. The gel flows easily, so a heavy thumb puts too much into each point.
- Keep the bevel up and use the shallowest angle that still gets you into the dermis.
- Gently massage after each section to spread the product evenly.
- Avoid treating immediately over obvious superficial vessels in the periorbital and neck skin.
Session protocol and spacing
The commonly used initial course is three sessions about three weeks apart, then maintenance. For maintenance, plan on the manufacturer's minimum duration of around three months, and review the skin before each top-up rather than booking on a fixed calendar. Some skins will hold well for longer between sessions, and others, particularly sun-damaged or smoker's skin, need closer spacing.
Clinical photographs under consistent lighting at baseline and before each session are worth the time. Skin-quality changes are gradual, and patients often forget how their skin looked at the start.
Aftercare is straightforward. Teoxane's product information advises no make-up for 12 hours, and avoiding strong sun, sub-zero temperatures and saunas or steam rooms for two weeks (source). Expect small papules and pinpoint bruising, and tell patients this in advance.
Redensity 1 versus Redensity 2
The two products are often confused because of the name, but they do different jobs.
- Redensity 1: non-cross-linked and fluid, for skin quality across broad areas. Superficial dermis.
- Redensity 2: a gel designed specifically for the under-eye area and fine lines. Our Teosyal Redensity II PureSense 2x1ml listing gives 15mg/ml HA with the same restructuring complex. Teoxane describes it as filling the under-eye hollow evenly and gives an expected duration of at least 12 months (source).
A common plan treats the under-eye with Redensity 2, then follows with a course of Redensity 1 over the cheeks and wider face so the skin quality around the corrected area matches. Treat Redensity 2 as a periorbital filler, with the anatomy and complication planning that implies, rather than as a booster.
Combining Redensity 1 with other treatments
Redensity 1 combines well with structural work. Teoxane's SKINQARE study, conducted across several centres in Spain and published in the Aesthetic Surgery Journal, looked at RHA 1 followed by Redensity 1 against RHA 1 alone. Teoxane reports that adding Redensity 1 extended improvements in hydration, elasticity and smoothness for up to five months, and that more than 80% of patients in the combined group were very satisfied at five months, about twice as many as with RHA 1 alone (Teoxane, SKINQARE). Read the full paper before quoting it to patients, but the sequence it supports (structural or fine-line correction first, then a booster course) matches how many clinics already work.
Against other boosters, the choice is mostly about the indication. Polynucleotides suit thin, fragile skin, particularly around the eyes. Bioremodelling HA products such as Profhilo work through a small number of deposits per session with less papule load. Redensity 1 suits patients who want hydration and texture improvement across a whole area with a fluid, easy-spreading gel. We compare these options in more detail in the best skin booster depends on the skin in front of you, and you can see the full Teoxane range in our Teosyal collection.
Frequently asked questions
How long does Redensity 1 last?
Teoxane gives the duration as at least three months. In practice it depends on age, skin condition, sun exposure and lifestyle, which is why maintenance is planned by reviewing the skin rather than at fixed intervals.
Is Redensity 1 a filler or a skin booster?
It is a skin booster. The HA is not cross-linked, so it hydrates and improves texture rather than adding volume or structure. If a patient needs volume, use a cross-linked filler, and consider Redensity 1 as a follow-on course.
What are the downsides of skin boosters like Redensity 1?
The main ones are temporary papules, pinpoint bruising and mild swelling, plus the need for a course of sessions and ongoing maintenance. Rare HA-related complications, including hypersensitivity, nodules and infection, still apply. Consent forms should list these, and patients should know the result builds gradually.
How many sessions of Redensity 1 does a patient need?
A typical initial course is three sessions about three weeks apart, followed by maintenance treatments based on how the skin holds. Thin or heavily sun-damaged skin may need an extra session in the first course.
Can Redensity 1 be used under the eyes?
Redensity 1 can be used for general skin quality on the lower lid and upper cheek with very superficial, low-volume placement, but for the under-eye hollow itself Redensity 2 is the product designed for that job.
Summary
Redensity 1 does one job well: improving hydration and texture across a whole area with a fluid, easy-spreading gel. Keep placement superficial, use small aliquots with gentle pressure, run an initial course of around three sessions, and quote the manufacturer's minimum duration in consultation. Pair it with structural correction where volume is the real problem, and use Redensity 2 when the concern is the under-eye hollow rather than the skin over it.
Topics
- Clinical Technique
- Skin Boosters
- Teosyal



